prosody-docker/prosody.cfg.lua

221 lines
9.0 KiB
Lua

-- Prosody XMPP Server Configuration
--
-- Information on configuring Prosody can be found on our
-- website at https://prosody.im/doc/configure
--
-- Tip: You can check that the syntax of this file is correct
-- when you have finished by running this command:
-- prosodyctl check config
-- If there are any errors, it will let you know what and where
-- they are, otherwise it will keep quiet.
--
-- Good luck, and happy Jabbering!
---------- Server-wide settings ----------
-- Settings in this section apply to the whole server and are the default settings
-- for any virtual hosts
-- This is a (by default, empty) list of accounts that are admins
-- for the server. Note that you must create the accounts separately
-- (see https://prosody.im/doc/creating_accounts for info)
-- Example: admins = { "user1@example.com", "user2@example.net" }
admins = { }
-- This option allows you to specify additional locations where Prosody
-- will search first for modules. For additional modules you can install, see
-- the community module repository at https://modules.prosody.im/
--plugin_paths = {}
-- This is the list of modules Prosody will load on startup.
-- Documentation for bundled modules can be found at: https://prosody.im/doc/modules
modules_enabled = {
-- Generally required
"disco"; -- Service discovery
"roster"; -- Allow users to have a roster. Recommended ;)
"saslauth"; -- Authentication for clients and servers. Recommended if you want to log in.
"tls"; -- Add support for secure TLS on c2s/s2s connections
-- Not essential, but recommended
"blocklist"; -- Allow users to block communications with other users
"bookmarks"; -- Synchronise the list of open rooms between clients
"carbons"; -- Keep multiple online clients in sync
"dialback"; -- Support for verifying remote servers using DNS
"limits"; -- Enable bandwidth limiting for XMPP connections
"pep"; -- Allow users to store public and private data in their account
"private"; -- Legacy account storage mechanism (XEP-0049)
"smacks"; -- Stream management and resumption (XEP-0198)
"vcard4"; -- User profiles (stored in PEP)
"vcard_legacy"; -- Conversion between legacy vCard and PEP Avatar, vcard
-- Nice to have
"csi_simple"; -- Simple but effective traffic optimizations for mobile devices
"invites"; -- Create and manage invites
"invites_adhoc"; -- Allow admins/users to create invitations via their client
"invites_register"; -- Allows invited users to create accounts
"ping"; -- Replies to XMPP pings with pongs
"register"; -- Allow users to register on this server using a client and change passwords
"time"; -- Let others know the time here on this server
"uptime"; -- Report how long server has been running
"version"; -- Replies to server version requests
"mam"; -- Store recent messages to allow multi-device synchronization
--"turn_external"; -- Provide external STUN/TURN service for e.g. audio/video calls
-- Admin interfaces
"admin_adhoc"; -- Allows administration via an XMPP client that supports ad-hoc commands
"admin_shell"; -- Allow secure administration via 'prosodyctl shell'
-- HTTP modules
--"bosh"; -- Enable BOSH clients, aka "Jabber over HTTP"
--"http_openmetrics"; -- for exposing metrics to stats collectors
--"websocket"; -- XMPP over WebSockets
-- Other specific functionality
--"announce"; -- Send announcement to all online users
--"groups"; -- Shared roster support
--"legacyauth"; -- Legacy authentication. Only used by some old clients and bots.
--"mimicking"; -- Prevent address spoofing
--"motd"; -- Send a message to users when they log in
--"proxy65"; -- Enables a file transfer proxy service which clients behind NAT can use
--"s2s_bidi"; -- Bi-directional server-to-server (XEP-0288)
--"server_contact_info"; -- Publish contact information for this service
--"tombstones"; -- Prevent registration of deleted accounts
--"watchregistrations"; -- Alert admins of registrations
--"welcome"; -- Welcome users who register accounts
}
-- These modules are auto-loaded, but should you want
-- to disable them then uncomment them here:
modules_disabled = {
-- "offline"; -- Store offline messages
-- "c2s"; -- Handle client connections
-- "s2s"; -- Handle server-to-server connections
-- "posix"; -- POSIX functionality, sends server to background, etc.
}
-- Server-to-server authentication
-- Require valid certificates for server-to-server connections?
-- If false, other methods such as dialback (DNS) may be used instead.
s2s_secure_auth = true
-- Some servers have invalid or self-signed certificates. You can list
-- remote domains here that will not be required to authenticate using
-- certificates. They will be authenticated using other methods instead,
-- even when s2s_secure_auth is enabled.
--s2s_insecure_domains = { "insecure.example" }
-- Even if you disable s2s_secure_auth, you can still require valid
-- certificates for some domains by specifying a list here.
--s2s_secure_domains = { "jabber.org" }
-- Rate limits
-- Enable rate limits for incoming client and server connections. These help
-- protect from excessive resource consumption and denial-of-service attacks.
limits = {
c2s = {
rate = "10kb/s";
};
s2sin = {
rate = "30kb/s";
};
}
-- Required for init scripts and prosodyctl
pidfile = "/var/run/prosody/prosody.pid"
-- Authentication
-- Select the authentication backend to use. The 'internal' providers
-- use Prosody's configured data storage to store the authentication data.
-- For more information see https://prosody.im/doc/authentication
authentication = "internal_hashed"
-- Many authentication providers, including the default one, allow you to
-- create user accounts via Prosody's admin interfaces. For details, see the
-- documentation at https://prosody.im/doc/creating_accounts
-- Storage
-- Select the storage backend to use. By default Prosody uses flat files
-- in its configured data directory, but it also supports more backends
-- through modules. An "sql" backend is included by default, but requires
-- additional dependencies. See https://prosody.im/doc/storage for more info.
--storage = "sql" -- Default is "internal"
-- For the "sql" backend, you can uncomment *one* of the below to configure:
--sql = { driver = "SQLite3", database = "prosody.sqlite" } -- Default. 'database' is the filename.
--sql = { driver = "MySQL", database = "prosody", username = "prosody", password = "secret", host = "localhost" }
--sql = { driver = "PostgreSQL", database = "prosody", username = "prosody", password = "secret", host = "localhost" }
-- Archiving configuration
-- If mod_mam is enabled, Prosody will store a copy of every message. This
-- is used to synchronize conversations between multiple clients, even if
-- they are offline. This setting controls how long Prosody will keep
-- messages in the archive before removing them.
archive_expires_after = "1w" -- Remove archived messages after 1 week
-- You can also configure messages to be stored in-memory only. For more
-- archiving options, see https://prosody.im/doc/modules/mod_mam
-- Audio/video call relay (STUN/TURN)
-- To ensure clients connected to the server can establish connections for
-- low-latency media streaming (such as audio and video calls), it is
-- recommended to run a STUN/TURN server for clients to use. If you do this,
-- specify the details here so clients can discover it.
-- Find more information at https://prosody.im/doc/turn
-- Specify the address of the TURN service (you may use the same domain as XMPP)
--turn_external_host = "turn.example.com"
-- This secret must be set to the same value in both Prosody and the TURN server
--turn_external_secret = "your-secret-turn-access-token"
-- Logging configuration
-- For advanced logging see https://prosody.im/doc/logging
log = {
info = "/var/log/prosody/prosody.log"; -- Change 'info' to 'debug' for verbose logging
error = "/var/log/prosody/prosody.err";
-- "*syslog"; -- Uncomment this for logging to syslog
-- "*console"; -- Log to the console, useful for debugging when running in the foreground
}
-- Uncomment to enable statistics
-- For more info see https://prosody.im/doc/statistics
-- statistics = "internal"
-- Certificates
-- Every virtual host and component needs a certificate so that clients and
-- servers can securely verify its identity. Prosody will automatically load
-- certificates/keys from the directory specified here.
-- For more information, including how to use 'prosodyctl' to auto-import certificates
-- (from e.g. Let's Encrypt) see https://prosody.im/doc/certificates
-- Location of directory to find certificates in (relative to main config file):
certificates = "certs"
Include "conf.d/*.cfg.lua"
---------- End of the Prosody Configuration file ----------
-- You usually **DO NOT** want to add settings here at the end, as they would
-- only apply to the last defined VirtualHost or Component.
--
-- Settings for the global section should go higher up, before the first
-- VirtualHost or Component line, while settings intended for specific hosts
-- should go under the corresponding VirtualHost or Component line.
--
-- For more information see https://prosody.im/doc/configure